sH5b7g~~60_57.JPG)
rleR4Q~~60_57.JPG)
rg)05!~~60_57.JPG)
HARGA 2.800.000
Specs and Features
Independent double wish bone suspension system
4WD drive train, dual drive which incorporates a two belt system and a rear drive diff and idler gear set up for maximum acceleration.
CVA plastic shock unit oil dampers included
Front shocks may be set up as ISF (Inboard Front Suspension) or as traditional stand up
Dual Drive Belts (174mm, 453mm)
Stamped Aluminum Motor Plate
Full Ball Bearings included
540-type brushed motor
Threaded Turnbuckle Shafts
The motor is installed at the mid-rear position which helps improve traction for the rear wheels.
Front and rear gearboxes are equipped with newly designed gear diff units to efficiently transmit the motor's power and offer the best traction and acceleration
Compatible with most TA05 and TA06 touring car and sports car body sets
Suspension parts from the previous TA-05 Version 2 platform are used on the new TA-06. (short reversible suspension, steering blocks, castor blocks and optional aluminum suspension mounts) are all transferable
Molded plastic parts are made of durable FRP (Fiberglass Reinforced Plastic)
Chassis battery compartment compatible with NiCd, NiMh, LiFe and LiPo battery technologies.
Battery pack may be accessed via an access hatch on the underside of the chassis
Battery is positioned down the center-line of the TA-06 chassis for minimal chassis role during hard cornering
Includes medium-narrow slick tires and medium narrow 20-spoke wheels (24mm +2 offset)
Includes GT-1 Spec Nissan GT-R polycarbonate body with separately molded side mirrors and rear wing,Radio gear, battery, charger and ESC (electronic speed control) are required and available separately.
INCLUDE :
Radio Control Unit: 2-Channel w/receiver & servo and ESC
Power Source: Battery Pack ,batteries for transmitter
Motor: Type 540
Charger: AC/DC timed or peak for battery pack
Tamiya 1/10 RC Toyota 86 TT-01 Type-E LED
.JPG)
.JPG)
.JPG)
HARGA 2.000.000
Feature:
- The new Toyota 86 comes on the fun-to-drive TT-01 Type-E chassis.
- The sporty form of the Toyota 86 has been realistically reproduced by the polycarbonate body and separate parts to depict light cases enhance realism.
- Radial tires with realistic tread patterns and silver mesh wheels help add to its stylish appearance.
- Scale: 1 : 10 Scale
- Construction Type: Assembly Kit
- Terrain Use: On Road
- Drive-Train: 4WD
- Drive Line: Dog Bone
- Differential Type: Gear
- Suspension: Fully Independent Double Wishbone
- Steering Mechanism: Bell-Crank
- Shock Damper: Friction Damper
- Shock Damper Material: Plastic
- Tire Type and Tread: Rubber and Radial
- Body Material: ABS Plastic
- ESC Type: TEU-105BK
- Motor Type: 540-Brushed Type
- Bearings: Plastic Bushing
- Chassis Material: Plastic
- Special Features: Extra Plated Wheels Included
Included: 7.2 Battery, Charger, Polycarbonate Paint, Radio Gear, Servo, Receiver
Tamiya TNX 5.2r 1:8 nitro monster truck RTR
HARGA 2.300.000
Specifications:
Type: RC model
Scale: 1:8
Length: about 560 mm
Width: 430 mm
Height: 260 mm
Weight: about 4700 g
Wheelbase: 370 mm
Hex: 17 mm
Remote control unit: 3-channel radio control system (27 MHz)
Drive: Nitro engine
Engine type: 4WD wheel
Chassis: TGM-04
Transmission: Adjustable 2-speed transmission
Engine: 5.2 cc Force engine with 24,000 U / min
Motor power: 2.99 hp
Brakes: two separately adjustable steel brakes for the rear axle
Tank: 125 ml
Speed: approx 85 km / h
Tamiya 1:8 Nitro Truggy Nitrage 5.2R 4WD XBG RTR
HARGA 2.000.000
Specs and Features
1/8 Ready-To-Run R/C Glow Engine Truggy
Single Speed transmission (Optional 2 speed transmission for increased speeds)
Lightweight and compact TRU-03 Receiver features failsafe function to prevent runaway driving caused by radio interference or low battery power.
Comes with external electric Tamiya Handy Starter with drive gear unit and plug heater.
Wheel/trigger type transmitter included.
Features newly developed high-density, oval spike tires and dish wheels.
Ball pivot type 4 wheel double wishbone suspension features 4 large capacity oil dampers.
Powerful 5.2cc (.32 cubic inch) FR-32FX engine with slide valve carburetor.
bearings used to ensure smooth and efficient movement.
Reinforced steel drive shafts.
AA & C Batteries, engine fuel are separately required to operate truck.
Tune-up truck with Tamiya Option Parts.
REQUIRED ITEMS
7.2V Ni-Cd battery and battery charger for Handy Starter.
12 LR6/AA/UM3 alkaline batteries for transmitter and receiver
1 LR14/C/UM2 alkaline battery for glow plug heater
Glow Engine Fuel and Fuel Filler